Filter
Top Products
Use these unbalanced outputs if your preamplifier or surround controller doesn’t have balanced
input jacks or if they are already used for another balanced source.
What You’ll Need:
• One pair of shielded interconnect cables with RCA plugs
• A preamplifier or surround controller with RCA input jacks
Before Connecting
Turn off the power to the T 3.
To Connect
Plug one end of the first cable into the right Line Output 1 jack on the T 3.
Plug the other end of this cable into the right channel tuner input jack on your
preamplifier.
Repeat steps 1 and 2 for the left channel.
CONNECTING THE UNBALANCED LINE OUTPUT 1 ON THE
T 3 TO YOUR PREAMPLIFIER OR SURROUND CONTROLLER
3
1
2
3&4
RS232 Control
Region
EU
U
S
Right
Left
INPUTS
13
2
4
PREAMPLIFIER
RCA Plugs
Right
Left