Parasound T 3 Stereo Amplifier User Manual


 
OPERATING YOUR T 3 continued
13
There are several ways to select a station on your T 3. Each method is described in detail below.
• Tune to the previous or the next available station
• Tune to the previous or the next frequency
• Select an individual preset station
• Directly select the station frequency
• Select the previous or the next preset station
Selecting Stations – Seek Tuning
This tunes or seeks only those stations that the T 3 can receive clearly. Seek tuning
doesn’t stop at weak stations where there’s too much background noise.
Seek Tuning with the Remote Control
Turn on the T 3 by pressing the On button on its remote control or the On-Off button
on its front panel. The station you had previously selected will appear in the display.
Press the Seek button on the remote control. < SEEK > will appear in the display.
Press the large > button on the remote control to seek the next station.
Press the large < button on the remote control to seek the previous station.
Seek Tuning at the Front Panel
Turn on the T 3 by pressing the On-Off button on the Front Panel or the On button on
its remote control. The station you had previously selected will appear in the display.
Press the < Select > button on the front panel until < SEEK > appears in the display.
Turn the round knob slightly clockwise to seek the next station.
Turn the knob slightly counter-clockwise to seek the previous station.
YOU SHOULD KNOW
You only need to nudge the round knob in the direction you wish the T 3 to seek stations.
Once you’ve initiated seek you don’t need to continue turning the knob.
Manual Tuning
Manual tuning lets you find weaker stations that seek tuning rejected. It also selects
frequencies where no stations are broadcasting.
Manual Tuning with the Remote Control
Turn on the T 3 by pressing the On-Off button on the front panel or the On button on
its remote control.
Press the < Manual > button on the remote control. < MANUAL > will appear in the display.
Press the > button to tune up.
Press the < button to tune down.
1
2
3
4
1
2
3
4
1
2
3
4
See page 18 for T 3 Front Panel and Remote Control layout