Filter
Top Products
Connect the input and output from your analog tape recorder to the Tape Play and Rec (Record)
jacks of the P 3. See Tape Record and Play Circuitry in the Technically Speaking section for
more information.
What You’ll Need:
• Two pairs of shielded interconnect cables with RCA plugs
• An analog recording component such as a cassette deck or a
MiniDisc recorder
Before Connecting
Remove power to all the components in your audio system.
To Connect
Plug one end of a cable into the right Tape Play/In jack on the P 3.
Plug the other end of this cable into the right line out (or Output) on the tape deck.
Repeat for the left channel.
Plug one end of another cable into the left Rec/Out jack on the P 3.
Plug the other end of this cable into the left Tape Rec/In (or Record) jack on the tape deck.
Repeat for the right channel.
RCA Plugs
Right
Left
CONNECTING AN ANALOG TAPE DECK TO THE P 3
7
1
2
3&4
5
6
7&8
CAUTION
1
3
4
2
Right
Left
COMPONENTS
TAPE DECK
OUTPUTS
Right
Left
INPUTS
7
8 6
5