Filter
Top Products
25
RQTV0265
LANG - 5 LANG - 4 FRANÇAIS DANSK ENGLISH
OTHER OPERATIONS
Using sound effects
Note:
• The following sound effects may not be available or have no effect
depending on the type of source.
• You may experience a reduction in sound quality when these sound
effects are used with some sources. If this occurs, turn the sound
effects off.
Press [SOUND].
(For fi les with the extension “.mp3” or “.MP3”.)
In DVD/CD, USB, AUX or AV
1
selection;
PRE EQ (Preset EQ) MAN EQ (Manual EQ)
D.BASS SURROUND
In MUSIC PORT, OPTION port
2
or FM/AM tuner selection;
PRE EQ (Preset EQ) MAN EQ (Manual EQ)
D.BASS RE-MASTER SURROUND
Changing the sound quality: Preset EQChanging the sound quality: Preset EQ
1 Press [ SOUND] to select “PRE EQ”.
2 Press [2] or [3] to select your desired setting.
HEAVY SOFT CLEAR
EQ OFF VOCAL
HEAVY : Adds punch to rock.
SOFT : For background music .
CLEAR : Clarifi es higher sounds.
VOCAL : Adds gloss to vocal.
EQ OFF : No effect.
Changing the sound quality: Changing the sound quality:
Manual EQManual EQ
1 Press [SOUND] to select “MAN EQ”.
2 (
Within 3 seconds or so
)
Change the sound quality with the cursor buttons.
➀ Select the sound range to be adjusted with [ ] or [ ].
BASS MID TREBLE
➁ Adjust the level with [ ] or [ ].
(–4 to +4)
Repeat step 2 to set the desired sound quality.
Changing the sound quality: Changing the sound quality:
Surround soundSurround sound
1 Press [SOUND] to select “SURROUND”.
2 Press [2] or [3] to select either “SURROUND ON” or
“SURROUND OFF”.
Changing the sound quality: Changing the sound quality:
RE-MASTER (Analogue)RE-MASTER (Analogue)
This function is only available for MUSIC PORT, OPTION port
2
or
FM/AM tuner selection mode.
1 Press [SOUND] to select “RE-MASTER”.
2 Press [2] or [3] to select either “RE-MASTER ON” or
“RE-MASTER OFF”.
For other modes with MP3 contents, refer to page 18.
Enjoying the bass: D.BASSEnjoying the bass: D.BASS
1 Press [SOUND] to select “D.BASS”.
2 Press [2] or [3] to select either “D.BASS ON” or “D.BASS
OFF”.
Alternatively, press [D.BASS] on the main unit several times to select
either “D.BASS ON” or “D.BASS OFF”.
1
For the United Kingdom and Continental Europe
Using the timers
Setting the clockSetting the clock
This is a 24-hour clock.
1 Press [CLOCK / TIMER] to select “CLOCK”.
CLOCK
˚ PLAY
Original display
2 (
Within 5 seconds or so
)
Press [4,
] or [¢, ] to set the time.
3 Press [CLOCK / TIMER] to finish setting the time.
Displaying the time
Press [CLOCK / TIMER] once when the unit is on or in standby mode.
The time is displayed for a few seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the play timer Using the play timer
You can set the play timer to come on at a certain time to wake you
up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio, USB,
option port or music port source, and set the volume.
1 Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK
˚ PLAY
Original display
2 (
Within 5 seconds or so
)
Press [4,
] or [¢, ] to set the starting time.
3 Press [CLOCK/TIMER] to confirm.
4 Repeat steps 2 and 3 to set the fi nishing time.
To activate the timer
5 Press and hold [−TIMER PLAY] to turn on the timer.
“˚PLAY ON” is displayed.
6 Press [y] to turn off the unit.
The unit must be off for the timer to operate.
To Action
Change the settings Repeat steps 1 to 4 and 6.
Change the source
or volume
1) Press and hold [−TIMER PLAY] to
select “˚PLAYOFF”.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
Check the settings
(when the unit is on
or in standby mode)
Press [CLOCK/TIMER] repeatedly to
select “˚PLAY”.
Cancel Press and hold [−TIMER PLAY] to select
“˚PLAYOFF”.
Note:
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT or OPTION port
2
or USB is selected as the
source when the timer comes on, the system turns on and
engages MUSIC PORT or OPTION port
2
or USB as the source. If
you wish to playback from the connected equipments, activate the
equipments’ play mode and increase the volume. (See the other
equipments’ instruction manual.)
2
For the United Kingdom, Continental Europe, Australia and N.Z.
RQTV0265_4B.indd 25RQTV0265_4B.indd 25 4/23/08 4:58:31 PM4/23/08 4:58:31 PM