18
VQT2W18
STEP 4: AC power supply cord connection
A AC power supply cord (supplied)
B To a household AC outlet
≥ Connect only after all other connections are complete.
≥The main unit consumes a small amount of AC power, even when it is turned off (When the “Quick Start” setting is “Off”: approx.
0.05 W). In the interest of power conservation, if you will not be using this unit for a long time, unplug it from the household AC
outlet.
STEP 5: Easy setup
The Easy setup assists you to make necessary
settings.
Follow the on-screen prompts to make basic settings for the
system.
Preparation
Turn on your TV and select the appropriate video input mode
(e.g., VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this
unit.
1 Press [Í].
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
Language
Select the language used on menu screen.
TV Aspect
Select the aspect to suit your TV and preference.
Wireless System
If a digital transmitter is inserted,
it is required to specify the current settings.
Speakers position
Specify the positioning of the surround speakers.
Speaker check
Check if the connection to each speaker is valid.
Speaker Output
Make surround sound setting for speaker output.
TV Audio
Select the audio input connection from your TV,
[item with “(TV)”].
Quick Start
Speed of startup from power off is increased.
3 Press [OK] several times to finish the “Easy
setup”.
After completing “Easy setup”, you can perform “Network Easy
Setting”.
≥ You can perform this setup anytime by selecting “Easy setup” in the Setup
menu. (> 39)
≥ Language and TV Aspect settings are automatically retrieved if this unit is
connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later
via an HDMI cable.
-
+
AC IN
Main unit
The unit should be installed near an accessible AC power outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the power cord from the AC power outlet.
OK
OK
SC-BTT750_350P_VQT2W18_eng.book 18 ページ 2010年6月21日 月曜日 午後4時51分