Getting started
11
VQT2W18
A Speaker cable sticker (supplied)
B Connector
Be sure to match the number on each sticker with the
connector color.
≥ Be careful not to cross (short-circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
≥ Don’t use a front speaker as a surround speaker or vice versa. Verify
the type of speaker with the label on the rear of the speaker before
connecting the appropriate cable.
≥ To avoid injury by falling or dropping the speaker, place the speaker cables
with care not to stumble or hook.
≥ Do not hold the speaker in one hand to avoid injury by dropping the
speaker when carrying.
Preparing cables and making connection
Speaker cable sticker Color
1 FRONT (L) WHITE
2 FRONT (R) RED
3 SURROUND (L) BLUE
4 SURROUND (R) GRAY
5 CENTER GREEN
6 SUBWOOFER PURPLE
FRONT
Lch
1
Use of the speaker cable stickers is
convenient when making cable connections.
e.g. Front speaker (L)
2
Push!
Connecting the speaker cables. Insert the wire fully,
taking care not to insert beyond the wire insulation.
r: White
s: Blue line
e.g. Surround speaker
SC-BTT750_350P_VQT2W18_eng.book 11 ページ 2010年6月21日 月曜日 午後4時51分