Filter
Top Products
33
RQT8549
Before use
See page 30 for receiver operations.
Selecting the equipment
connected to the HDMI
input terminal
• You set the connected
equipment as a DVD
recorder or DVD player
through these steps.
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select the equipment connected to the HDMI
input terminal and confirm the choice.
DVR : When the connected
equipment is a DVD
recorder
DVD : When the connected
equipment is a DVD
player
Factory setting: DVR
Reducing standby
power consumption
(power saving standby
mode)
1 Select and confirm the choice.
2 Select and confirm the choice.
3 Select and confirm the choice.
• The volume of consumed power becomes 0.25 W if you select
“OFF
”
.
• The standby through function (á page 5) becomes unavailable
when you make HDMI connections.
•
HDAVI Control (
á
page 19) does not function when the unit is off.
OFF : When you wish to
reduce standby power
consumption
ON : When standby power
consumption level is
normal
Factory setting: ON
Setting ADVANCED
DUAL AMP functions off
1 Select and confirm the choice.
2 Select and confirm the choice.
OFF :
Advanced dual amp functions
are off in this setting.
AUTO :Advanced dual amp
functions are on in
this setting.
Factory setting: AUTO
Listening comfortably at
low volume
• Change this setting to listen
to software recorded with
Dolby Digital at low volume
(such as late at night)
maintaining audio clarity. It
reduces the peak level in
loud scenes without
affecting the sound field.
1 Select and confirm the choice.
2 Select a setting and confirm the choice.
This function does not work when disc data does not support it.
OFF :
The software is played with
the original dynamic range
STANDARD
:
The level
recommended by
the producer of the
software for
household viewing
MAX :
The maximum allowable
compression (recommended
for night viewing)
Factory setting: OFF
Switching the attenuator
• Switch the attenuator on when
sounds become distorted while
playing an analog input source
and the sign “OVERFLOW ”
appears on the display.
1 Select and confirm the choice.
2 Select and confirm the choice.
To cancel, select “OFF ”.
OFF : off ON : on
Factory setting: OFF
Delaying audio output and
synchronizing it with video output
• Correct the time difference by
delaying audio output when sounds
and pictures do not match.
1 Select and confirm the choice.
2 Select and confirm the choice.
OFF :Normal setting
ON : Setting for delaying
audio output
Factory setting: OFF
Returning settings to
conditions upon factory
settings (Reset function)
• Re-enter settings to your
liking when necessary.
1 Select and confirm the choice.
2 Select and confirm the choice.
To cancel, select “NO ”.
When you select “YES ”, the input source becomes TUNER
(Preset Channel 1). (Preset radio stations will not be erased.)
YES : Choice for resetting
NO : Choice against
resetting