Filter
Top Products
19
RQT8549
Using HDAVI Control
1.
Connect the unit to a Panasonic TV (VIERA) and DVD recorder (DIGA) under HDAVI Control using the HDMI cable (
á
page 5).
(It is recommended that you use Panasonic’s HDMI cable. Depending on the cable used, this function may not be possible.)
2. Make settings on the TV (VIERA) to activate HDAVI Control.
3. Turn all equipment on, switch the TV off, put it back on, and check if it shows pictures correctly. (Take these steps after
changing connections or settings.)
Available models (As of April 2006)
TV (VIERA):TH-42/50/58PX600, TH-37/42/50PX60, TH-58PX60, TH-42PD60, TH-42/50PX6
DVD recorder (DIGA): DMR-ES25, DMR-ES45V, DMR-EH55, DMR-EH75V, DMR-ES46V
What is HDAVI Control?
HDAVI Control is a convenient function that offers linked operations of this unit, and a Panasonic TV (VIERA) or DVD recorder
(DIGA) under HDAVI Control. You can use this function by connecting the equipment with the HDMI cable. See the operating
instructions for connected equipment for operational details.
OUT (DVD RECORDER)IN
The unit’s rear view
TV HDMI
(AV IN)
DVD HDMI
(AV OUT)
TV (VIERA)
DVD recorder (DIGA)
Enjoying Home Theater features through one-touch operations
Direct the remote control to the DVD recorder (DIGA)
and press [ONE TOUCH PLAY].
T
he unit performs the following operation automatically when you simply press [ONE TOUCH PLAY].
1. The DVD recorder goes on.
• The DVD recorder starts playing a disc that is in.
•
The DVD recorder plays back a recorded TV program (the last recorded program) when a disc is not in.
2. The TV goes on and the TV input changes.
3.
This unit goes on and the selector changes to “DVR ”, and Multi-channel playback starts.
When adjusting the volume: Press [ + VOLUME
-
].
You can also adjust the volume on your TV (VIERA)’s remote control.
(A message informing the action appears on your TV while you adjust the volume.)
• Press [u SKIP] and start playing a DVD disc or a recorded TV program again when playback
does not start from the beginning.
• This unit automatically goes off when you switch your TV (VIERA) off. (This operation is unavailable when you set the input source
as TUNER or CD on this unit.)
• Audio output automatically moves to speakers on your TV (VIERA) when you turn the unit off.
Audio output moves from speakers on the TV (VIERA) to speakers connected to the unit when you turn the unit on.
• This unit goes from off to on and speakers connected to the unit start producing sounds when you make settings for Home theater
on your TV (VIERA).
To play back TV sounds on multi-channels
You must make digital audio (OPTICAL) output connections (
á
page
9) for doing this.
The input source for the unit changes to “TV
” when you select a TV channel or operate the TV in other ways (
á
page
20).
O
N
E
T
O
U
C
H
P
L
A
Y
G
A
T
O
R
O
P
M
E
N
U
F
U
N
0
ANALOG 6CH
BAND
CH
VOLUME
DIRECT TUNING
ENTER
SKIP
SLOW/SEARCH
STOP
PAUSE
PLAY
DRIVE SELECT
DVD RECORDER
CM SKIP
DISC
O
N
E
T
O
U
C
H
P
L
A
Y
Note
Setting the unit against HDAVI Control operations
1 Press and hold [-MENU,
-
SETUP, RETURN] for
approximately 2 seconds.
2 Select and confirm the setting.
3 Select and confirm the setting.
4 Select and confirm the setting.
OFF:Setting for canceling linked operations
ON: Setting for activating linked operations (Factory setting)
5 Press [-MENU, –SETUP, RETURN] 2 times to select
“EXIT ” and press [ENTER].
MENU
SETUP
RETURN
INPUT SELECTOR
ENTER
INPUT SELECTOR
ENTER