Filter
Top Products
18
RQT8549
Playback options
RECEIVER
AV
SYSTEM
TV
RECORDER
DVD
DVD
PLAYER
ANALOG 6CH
VCRCD
TUNER
BAND
AUTO SPEAKER
DETECTOR
ADVANCED
DUAL AMP
BI-AMP
WIRELESS
READY
POWER
SPEAKERS
AB
AUTO SPEAKER
DETECTOR
MULTI CH
SURROUND
AUX
S VIDEO IN
VIDEO IN
L
A
U
DIO
IN
R
MENU
SETUP
RETURN
INPUT SELECTOR
ENTER
VOLUME
HDMI
TUNE
[BI-AMP]
ADVANCED
DUAL AMP
SPEAKERS
AB
Using
SPEAKERS
B
Sound is output from the
speakers connected to the
FRONT B terminals on this unit.
Press
• Playback is in stereo (2-channel).
• When only the SPEAKERS B setting is selected and the input source is
multi-channel, “2CH MIX” appears on the display.
• To turn off the sound from the speakers connected to the FRONT A
terminals, press [SPEAKERS A] and cancel “ ”.
• Selected speakers output sounds assigned to front 2 channels when you
make analog 6-channel connections for DVD-Audio sources.
• If you select SPEAKERS B only, the following are set automatically
irrespective of settings selected in “Setting speakers and their sizes”
(
á
page 31).
Speaker size: LARGE
Subwoofer: NO (Bass is output from the front speakers.)
ADVANCED
DUAL AMP
function
The advanced dual amp function activates
automatically when you use 2-channel
stereo playback or 5.1-channel playback.
The unit takes advantage of the
unused surround back speaker
amplifier, and runs one speaker with
two amplifiers when this function is on.
Advanced dual amplifier offers you sounds
that are clearer and higher in audio quality
than those available in normal playback.
• The [ADVANCED DUAL AMP]
indicator stays on while
advanced dual amp is at work. You can also set the advanced dual amp
function off (
á
page 33).
Enjoying BI-
AMP sounds
This function activates automatically when you
play analog audio sources or two-channel PCM
signals through bi-wiring connections.
The unit takes advantage of the front speaker
and the surround speaker amps, and drives the
speakers’ high-frequency and low-frequency
sections separately when this function is on.
The advanced dual amp function (
á
above) is
available with the bi-amp function. When
combined, the two functions enhance clarity
and audio quality of stereo sounds.
• Refer to page 11 for connecting
BI-WIRE speakers.
•
Select “
YES
” in “Setting bi-wiring
connections” (
á
page 31).
•
Switch the [MULTI CH
SURROUND] effect off (
á
page 16).
You cannot use the bi-amp function with
analog 6-channel connections for DVD-
Audio sources (
á
below).
• The [BI-AMP] indicator stays on while
bi-amp is at work.
• Refer to page 32 for “Making bi-amp
settings”.
Playing DVD-
Audio
Enjoying DVD-
Audio sources
through digital
connections
Connect the unit to a DVD recorder or DVD
player using the HDMI cable (
á
page 5) or a
digital cable (COAXIAL 1) (
á
pages 6 and 7).
Speaker settings (
á
pages 14 and 31) are canceled
when the unit receives a DVD-Audio multi-channel
signal through the HDMI input terminal. Set distances
from the listening-viewing position and speaker sizes
on your DVD recorder or DVD player in such cases.
Playing DVD
ANALOG 6CH
• Refer to page 8 for analog 6-channel
connections.
• Turn SPEAKERS on.
(DVD ANALOG 6CH only works when either
SPEAKERS A or BI-WIRE is on.)
• Set the selector to “DVD ”. (á page 16)
Press and hold until
“DVD 6CH ” is displayed.
•
To cancel, press and hold until “
DVD
” is displayed.
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is “DVR ”. Make
analog 6-channel connections and
switch the mode to “DVD ”.
Speaker settings made on the unit
(
á
pages 14 and 31) are canceled when
you use DVD analog 6-channel playback.
Set distances from the listening-viewing
position and speaker sizes on your DVD
recorder and DVD player.
Enjoying high
quality 2-channel
analog sounds
You can enjoy high quality stereo sound with
192 kHz 2-channel DVD-Audio.
1. Cancel the “DVD 6CH ” setting.
(á above)
2.
Set the input signal to “ANALOG ” in
“Setting input signals”. (
á
page 32)
SPEAKERS
B
Note
A
Note
Note
DVD
PLAYER
ANALOG 6CH
Note