Panasonic PT-DW17KU Home Theater System User Manual


 
[DISPLAY OPTION] menu
92 - ENGLISH
Settings
[RGB IN]
(supported during RGB
signal input only)
Set to match the signal to input to the <RGB 1 IN>
terminal.
1) Press

to select [RGB IN].
2) Press the <ENTER> button.
z
The [RGB IN] screen is displayed.
3) Press

to select an item.
To set [RGB1 INPUT SETTING]
4) Select [RGB1 INPUT SETTING] in Step 3).
5) Press
󱚣󱚤
to switch [RGB1 INPUT
SETTING].
z
The setting will change as follows each time
you press the button.
[RGB/YP
B
P
R
] [Y/C]
[RGB/YP
B
P
R
]
Select when inputting an RGB signal
to the <RGB 1 IN> terminal.
[Y/C]
Select when inputting a luminance
signal and color signal to the <RGB
1 IN> terminal.
To switch the slice level of an
input sync signal
4) Select [RGB1 SYNC SLICE LEVEL] or
[RGB2 SYNC SLICE LEVEL] in Step 3).
5) Press
󱚣󱚤
to switch the [RGB1 SYNC
SLICE LEVEL] or the [RGB2 SYNC
SLICE LEVEL].
z
The setting will change as follows each time
you press the button.
[LOW] [HIGH]
[LOW] Set the slice level to [LOW].
[HIGH] Set the slice level to [HIGH].
[DVI-D IN]
Switch the setting when the external equipment is
connected to the <DVI-D IN> terminal of the projector
and the image is not projected correctly.
1) Press

to select [DVI-D IN].
2) Press the <ENTER> button.
z
The [DVI-D IN] screen is displayed.
3) Press

to select [DVI EDID].
4) Press
󱚣󱚤
to switch [DVI EDID].
z
The setting will change as follows each time
you press the button.
[EDID3] [EDID1] [EDID2:PC]
[EDID3]
Switch between ne settings for a
moving image and for a still image.
[EDID1]
Select mainly when an external
device that outputs movie-type
image signals (such as a blu-ray
disk player) is connected to the
<DVI-D IN> terminal.
[EDID2:PC]
Select mainly when an external
device that outputs still image-
type signals (such as a computer)
is connected to the <DVI-D IN>
terminal.
5) Press

to select [DVI SIGNAL
LEVEL].
6) Press
󱚣󱚤
to switch [DVI SIGNAL
LEVEL].
z
The setting will change as follows each time
you press the button.
[0-255:PC] [16-235]
[0-255:PC]
Select when an external device
(such as a computer) is connected
via DVI-D terminal output.
[16-235]
Select when an external device
(such as a blu-ray disc player)
is connected via HDMI terminal
output by use of a conversion cable
or similar cable.
Note
z
The optimal setting is different depending on the
output setting of the connected external equipment.
Refer to the instruction manual of the external
equipment regarding the output of the external
equipment.
z
The data for Plug and play will change when the
setting is changed. Refer to “List of compatible
signals” (
page 167) for a resolution that supports
plug and play.