Panasonic PT-DW17KU Home Theater System User Manual


 
[NETWORK] menu
ENGLISH - 127
Settings
Accessing from the Web browser
1) Start up the Web browser on the computer.
2) Enter the IP address set on the projector into the URL entry eld of the Web browser.
3) Enter the user name and the password.
z
The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the
password is panasonic (lower case).
4) Click OK.
z
The [Projector status] page is displayed.
Note
z
If you use a Web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL]
(
page 125).
z
Do not perform setting or control simultaneously by starting up multiple Web browsers. Do not set or control the
projector from multiple computers.
z
Change the password rst.(
page 140)
z
The administrator rights allows to use all functions. The user rights allow use of [Projector status] (
page 128),
confirmation of the error information page (
page 129), [Network status] (
page 130), [Basic control] (
page 132),
and [Change password] (
page 140) only.
z
Access will be locked for few minutes when an incorrect password is entered three times consecutively.