Panasonic PT-DW17KU Home Theater System User Manual


 
[SECURITY] menu
122 - ENGLISH
Settings
[DISPLAY SETTING]
Overlap the security message (text or image) over the
projecting image.
1) Press

to select [DISPLAY
SETTING].
2) Press
󱚣󱚤
to switch [DISPLAY
SETTING].
z
The setting will change as follows each time
you press the button.
[OFF] [TEXT]
[USER
LOGO]
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
[USER
LOGO]
The picture registered by the user is
projected.
Note
z
To create the image for [USER LOGO], “Logo
Transfer Software” included in the supplied CD-
ROM is required.
[TEXT CHANGE]
Change the text displayed when the text display is
enabled by selecting [TEXT] in [DISPLAY SETTING].
1) Press

to select [TEXT CHANGE].
2) Press the <ENTER> button.
z
The [TEXT CHANGE] screen is displayed.
3) Press
󱚣󱚤
to select the text, and
press the <ENTER> button to enter the
text.
4) Press
󱚣󱚤
to select [OK], and
press the <ENTER> button.
z
The text is changed.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control
panel and the remote control.
1) Press

to select [CONTROL
DEVICE SETUP].
2) Press the <ENTER> button.
z
The [CONTROL DEVICE SETUP] screen is
displayed.
3) Press

to select an item.
To set [CONTROL PANEL]
z
You can set the limitation on the control from
the control panel.
4) Select [CONTROL PANEL] in Step 3).
5) Press the <ENTER> button.
z
The [CONTROL PANEL] screen is displayed.
6) Press
󱚣󱚤
to switch [CONTROL
PANEL].
z
The setting will change as follows each time
you press the button.
[ENABLE] [DISABLE] [USER]
[ENABLE]
Enables all button operations from
the projector body.
[DISABLE]
Disables all button operations
from the projector body.
[USER]
Operation of all buttons on the
projector body can be enabled/
disabled separately.
7) Press

to select [APPLY], and
press the <ENTER> button.
z
The conrmation screen is displayed.
8) Press
󱚣󱚤
to select [OK], and press
the <ENTER> button.
z
Enabling/disabling any projector body
button
7) Select [USER] in Step 6).
z
Setting items can be selected for the buttons on
the projector body.