Panasonic PT-DW17KU Home Theater System User Manual


 
[PROJECTOR SETUP] menu
ENGLISH - 109
Settings
[STATUS]
Displays the status of the projector.
1) Press

to select [STATUS].
2) Press the <ENTER> button.
z
The [STATUS] screen is displayed.
3) Press
󱚣󱚤
to switch the pages.
[INPUT]
Displays the input terminal
currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL
FREQUENCY]
Displays the frequency of the
input signal.
[PROJECTOR
RUNTIME]
Displays the operation times of
the projector.
[LAMP1]
Displays the usage time and
status of Lamp 1.
[LAMP2]
Displays the usage time and
status of Lamp 2.
[LAMP3]
Displays the usage time and
status of Lamp 3.
[LAMP4]
Displays the usage time and
status of Lamp 4.
[INTAKE AIR
TEMP.]
Displays the status of the
air intake temperature of the
projector.
[OPTICS
MODULE TEMP.]
Displays the status of the internal
temperature of the projector.
[AROUND LAMP
TEMP.]
Displays the status of the
temperature around the lamps of
the projector.
[REMOTE2
STATUS]
Displays the control status of the
REMOTE2.
[PROJECTOR
TYPE]
Displays the type of the
projector.
[SERIAL
NUMBER]
Displays the serial number of the
projector.
[LAMP UNIT
MODEL NO.]
Displays the model no. of the
lamp unit.
[LAMP1 SERIAL
NUMBER]
Displays the serial number of the
lamp 1.
[LAMP2 SERIAL
NUMBER]
Displays the serial number of the
lamp 2.
[LAMP3 SERIAL
NUMBER]
Displays the serial number of the
lamp 3.
[LAMP4 SERIAL
NUMBER]
Displays the serial number of the
lamp 4.
[MAIN VERSION]
Displays the main version of the
rmware of the projector.
[SUB VERSION]
Displays the sub version of the
rmware of the projector.
[NETWORK
VERSION]
Displays the network version of
the projector.
[UPGRADE
(ET-UK20)]
Displays the activation status
based on the upgrade kit.
[ON COUNT]
z
[POWER ON TIMES]:
Displays the number of times
the power is turned on.
z
[LAMP1 ON] to [LAMP4 ON]:
Displays the number of times
the lamp is turned on.
z
[SHUTTER]:
Displays the number of times
the shutter is closed.
[NUMBER OF
ENTRY SIGNAL]
Displays the number of
registered signals.
[AC VOLTAGE]
Displays the status of the AC voltage.
[SIGNAL
INFORMATION]
z
[MEMORY NO.]:
Displays the memory number
of the input signal.
z
[INPUT]:
Displays the input terminal
currently selected.
z
[SIGNAL NAME]:
Displays the input signal name.
z
[SIGNAL FREQUENCY]:
Displays the frequency of the
input signal.
z
[SYNC.STATE]:
Displays the synch polarity of
the input signal.
z
[V.SYNC WIDTH]:
Displays the vertical sync signal
pulse width of the input signal.
z
[SCAN TYPE]:
Displays the scan type of the
input signal.
z
[TOTAL DOTS]:
Displays the total dot count of
the input signal.
z
[DISPLAY DOTS]:
Displays the number of input
signal display dots.
z
[TOTAL LINES]:
Displays the total line count of
the input signal.
z
[DISPLAY LINES]:
Displays the number of input
signal display lines.
z
[SAMPLING]:
Displays the sampling
information of the input signal.
z
[BIT DEPTH]:
Displays the gradation of the
input signal.
Note
z
Some items in [SIGNAL INFORMATION] may be
displayed and others not displayed, depending on the
signal being input.