Filter
Top Products
RQT8046
42
Specifications
n AMPLIFIER SECTION
FTC output power both channels driven
10 % total harmonic distortion
60 Hz to 3 kHz (Low channel) 35 W per channel (6 Ω)
3 kHz to 16 kHz (High channel) 35 W per channel (6 Ω)
Total Bi-Amp power 70 W per channel
RMS output power both channels driven
10 % total harmonic distortion
1 kHz (Low channel) 40 W per channel (6 Ω)
8 kHz (High channel) 40 W per channel (6 Ω)
Total Bi-Amp power 80 W per channel
Output impedance
HEADPHONE 16 Ω to 32 Ω
n FM TUNER SECTION
Frequency range 87.9 MHz to 107.9 MHz (Default) (200 kHz steps)
87.5 MHz to 108.0 MHz (100 kHz steps)
Sensitivity 1.50 µV (IHF)
S/N 26 dB 1.70 µV
Antenna terminals 75 Ω (unbalanced)
Preset stations 15
n AM TUNER SECTION
Frequency range 520 kHz to 1710 kHz (10 kHz steps)
Sensitivity S/N 20 dB at 1000 kHz 560 µV/m
Preset stations 15
n CASSETTE DECK SECTION
Track system 4-track, 2-channel
Heads
Record/playback Solid permalloy head
Erasure Double gap ferrite head
Motor DC servo motor
Recording system AC bias 100 kHz
Erase system AC erase 100 kHz
Tape speed 4.8 cm/s (1-7/8 ips)
Overall frequency response (+3, -6 dB) at DECK OUT
Normal 35 Hz to 14 kHz
Wow and flutter 0.10 % (WRMS)
Fast forward and rewind time
Approx. 120 seconds with C-60 cassette tape
n CD SECTION
Disc CD, MP3, WMA, CD-R/RW, and HighMAT
8 cm/12 cm
Sampling frequency
CD 44.1 kHz
MP3/WMA 32 kHz, 44.1 kHz, 48 kHz
Bit rate
MP3 32 kbps to 320 kbps
WMA 40 kbps to 192 kbps
Decoding 16 bit linear
Pickup
Beam source Semiconductor laser
Wavelength 780 nm
Number of channels Stereo
Frequency response 20 Hz to 20 kHz (+1, -2 dB)
Wow and flutter Below measurable limit
Digital filter 8 fs
D/A converter MASH (1 bit DAC)
n SD SECTION
Sampling frequency 32 kHz (LP), 44.1 kHz (SP, XP)
Coding system SD audio playback (AAC/MP3/WMA)
SD audio record (AAC)
Number of channels 2 channel (stereo)
n OTHER
CDèSD Recording speed: Maximum 4 times (LP)
n SPEAKER SECTION (Front speakers SB-PM71)
Type 3 way, 3 speaker system (Bass-Ref)
Speaker units
Woofer 10 cm (4”) cone type
Tweeter 6 cm (2
3
/
8
”) cone type
S-tweeter Piezo type
Impedance
High 6 Ω
Low 6 Ω
Input power (IEC MAX)
High 40 W
Low 40 W
Output sound pressure 84 dB/W (1.0 m)
Crossover frequency 3 kHz, 10 kHz
Frequency range 50 Hz to 50 kHz (–16 dB)
60 Hz to 45 kHz (–10 dB)
Dimensions (WxHxD) 145 mm x 250 mm x 232 mm
(5
23
/
32
” x 9
27
/
32
” x 9
5
/
32
”)
Mass 2.4 kg (5.3 lbs)
n GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 141 W
Dimensions (WxHxD) 175 mm x 249.5 mm x 379.6 mm
(6
29
/
32
” x 9
27
/
32
” x 14
31
/
32
”)
Mass 5.8 kg (12.8 lbs)
Note
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by digital spectrum analyzer.
Power consumption in standby mode Approx. 0.3 W
Reference