RQT8046
27
Recording from SD/the radio to cassette tape
Note
You can use SD cards with capacities between 8MB and 1GB on this unit.
(⇒ page 6)
Preparation
Insert the SD card (⇒ page 8) or the cassette tape. (⇒ page 19)
(Normal recording only)
1 Select “SD” as the source.
2
(Normal recording only)
1 Tune to the station (⇒ page 22).
2
(Normal recording only)
Program record allows you to specify the tracks to be recorded to tape.
1 Select “SD” as the source.
2 Program the desired tracks. (⇒ page 17, Program play,
steps 1 to 3)
3
To stop
Press [g STOP].
To pause (recording from the radio)
While pressing [*/h REC], press [TAPE].
The cassette tape pauses and the radio continues playing. (“REC” flashes
on the display.)
Press again to restart recording.
Note
• Recording automatically stops when the end of the side of the tape
being recorded to is reached. To record the other side, turn the tape
over.
• When recording an AM broadcast, sound is momentarily interrupted
when you start and stop the recording.
• You cannot select RANDOM mode when recording.
Recording from SD
Recording from the radio
Program recording
+
While pressing [*/h REC],
press [TAPE] to start recording.
+
While pressing [*/h REC],
press [TAPE] to start recording.
+
While pressing [*/h REC],
press [TAPE] to start recording.
Recording