Filter
Top Products
RQT8046
32
Convenient functions
1 Press [CLOCK/TIMER] to select "CLOCK".
Every time you press the button:
2 Within 10 seconds:
Press [
u
2
/REW,
i
1
/FF] to set the day and press [LIST/ENTER].
Every time you press the button:
3
Press [
u
2
/REW,
i
1
/FF] to set the time and press [LIST/ENTER].
• Press and hold to change the time faster.
The time is set and the original display is restored.
To display the clock
When the unit is on, press [CLOCK/TIMER].
When the unit is off, press [DISPLAY, –DIMMER].
To stop partway
Press [g STOP].
Note
• This is a 12-hour clock.
• Reset the clock regularly to maintain accuracy.
• If you set the clock, the demo function will turn off automatically.
• If there is a power failure or the plug is disconnected from the AC outlet, set this again.
(When disc, card or tape is selected as the source and the unit is stopped)
The unit turns off to save power if it is left unused for 10 minutes.
Press and hold [SLEEP, –AUTO OFF] until “AUTO OFF” is
displayed.
Every time you press the button:
AUTO OFF v SCREEN SAVER (Auto off cancel) (⇒ page 12)
This function does not work if the source is tuner or AUX.
This timer turns the unit off after a set time.
While enjoying the desired source:
Press [SLEEP, –AUTO OFF] to select the time (minutes).
Every time you press the button:
To cancel the sleep timer
Press [SLEEP, –AUTO OFF] to select “SLEEP OFF”.
To confirm the remaining time
Press [SLEEP, –AUTO OFF] once.
The remaining time is shown for about 5 seconds.
You can use the sleep timer in combination with the play/record timer.
Make sure the unit is off before the play/record timer’s start time.
Setting the time
Auto-off function
The sleep timer
Original display
Convenient functions