Filter
Top Products
RQT8046
31
The unit can record the disc titles for 100 CDs, 25 track titles per CD.
Preparation
1 Insert the CD. (⇒ page 8)
2 Press [q/h CD] and then [g STOP] to select “CD” as the source.
3 To select a CD
Press [DISC], then press the numbered button to select the CD and
press [g STOP].
1 Press [TITLE IN].
2 Press [u 2/REW, i 1/FF] to select the title
type (Disc title/Artist name/Track title), track
number, etc. and press [LIST/ENTER].
3
Enter the characters
(
⇒
page 30)
and press [LIST/ENTER].
Repeat steps 2 and 3 as necessary.
4 Press [TITLE IN].
The title name is entered.
To stop partway
Press [TITLE IN].
To check titles
Press [DISPLAY, –DIMMER] several times while stopped.
Track titles appear during play or when you skip tracks while stopped.
(Nothing is shown if you only enter spaces.)
To delete titles
1 During stop, press [EDIT MODE].
“TITLE ERASE?” appears.
2 Press [LIST/ENTER].
3 Press [e, r] to select the title and press [LIST/ENTER].
“TITLE ERASE?” and “PRESS ENTER” alternatively appear.
4 Press [LIST/ENTER].
The title is erased after “COMPLETE” is displayed. All the titles you
entered for the disc are deleted.
Repeat to delete the titles on other CDs.
To cancel, press [g STOP].
Preparation
1 Insert the SD card. (⇒ page 8)
• Securely close the lid of the SD card slot. You cannot edit if the lid is
open.
2 Press [q/h SD] and then [g STOP] to select “SD” as the source.
1 Press [TITLE IN].
2 Press [u 2/REW, i 1/FF] to select the track
number and press [LIST/ENTER].
3
Enter the track title
(
⇒
page 30)
and press [LIST/ENTER].
4
Enter the artist name
(
⇒
page 30)
and press [LIST/ENTER].
Repeat steps 2 through 4 as necessary.
5 Press [TITLE IN].
When “CARD Writing” stops flashing editing is complete.
To stop partway
Press [TITLE IN].
Note
• Do not open the SD card lid while editing as the operation in progress
stops and the editing is not completed properly.
• You can use SD cards with capacities between 8MB and 1GB on this
unit. (⇒ page 6)
Preparation
1 Insert the SD card. (⇒ page 8)
• Securely close the lid of the SD card slot. You cannot edit if the lid is
open.
2 Press [q/h SD] and then [g STOP] to select “SD” as the source.
1 Press [EDIT MODE] to select “PLAYLIST?” and
press [LIST/ENTER].
2 Press [u 2/REW, i 1/FF] to select “PL
TITLE?” and press [LIST/ENTER].
3 Press [u 2/REW, i 1/FF] to select the playlist
and press [LIST/ENTER].
4
Enter the characters
(
⇒
page 30)
and press [LIST/ENTER].
When "CARD Writing" stops flashing editing is complete.
To stop partway
Press [g STOP].
Note
• Do not open the SD card lid while editing as the operation in progress
stops and the editing is not completed properly.
• You can use SD cards with capacities between 8MB and 1GB on this
unit. (⇒ page 6)
Entering titles on a CD (CD title memory) Entering titles on a SD after recording
Entering a playlist title
Editing