Filter
Top Products
RQT5324
32
Using the timer
Using the record timer
Preparations
• Switch on the power.
• Make sure that you have completed “Setting the time” on page 13.
Set the timer at least 2 minutes before you want to start recording.
The figure shows how to set the record timer for recording from 6:30
p.m. to 8:00 p.m.
1. Press [CLOCK/TIMER] to select “ REC”.
Every time you press the button;
2. “ON” time setting
(Within 8 seconds or so)
Press [TUNE/TIME ADJ ( or )] to select
the starting time.
Press [CLOCK/TIMER].
3. “OFF” time setting
Press [TUNE/TIME ADJ ( or )] to select
the ending time.
Press [CLOCK/TIMER].
4. Source selection
Select the desired source and then prepare for
recording.
To record from the radio
Press [TUNER BAND] to select the band and tune in the desired
station.
To record the external unit
Press [AUX].
5. Prepare for recording.
1. Insert a tape into deck 2 with the side on which the recording
will start facing you.
2. Select the reverse mode.
Note
Reverse mode does not become part of the timer memory.
6. Press [ PLAY/ REC] to select “ REC”.
Every time you press the button;
7. Press [ , POWER] to switch off the power.
About 30 seconds before the set time, the system mutes all sound
automatically.
To switch the timer OFF
Press [ PLAY/ REC] and check “ REC” goes out.
1
7
6
3
2
2, 3
7
6
1, 2, 3
CLOCK PLAY REC Previous display
PLAY REC (off)
Timer and others