Filter
Top Products
RQT5324
19
CD operation
Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
1. Press [CD].
Ensure CD is stopped.
2. Press [PROGRAM].
3. Press [DISC].
4. (Within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5. Press the numeric button to select the desired
track.
Repeat steps 3 – 5 until you have programmed the desired
track(s).
6. Press [ ].
Play will start in the programmed sequence.
To cancel program play mode
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [ ] will cancel program play, but it will also erase the entire
program.
To select a two-digit track
Press [≥10] and then the two numbers you want.
When “CD FULL” appears
The number of programmed tracks is limited to 24. No further tracks
can be programmed.
You can do the following during program mode
• Check program contents.
Press [ ] or [ ].
Every time you press one of the buttons, the track and program No.
are shown on the display.
• Add to the program.
Repeat steps 3 through 5.
• Cancel entries.
Memory retention
Your program is retained in memory for about 2 weeks while the sys-
tem is unplugged.
To replay your program
If you turned off your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [ ].
If you program a track number not on your CDs
The track is initially programmed, but during program play, the player
will skip that track and will continue playing from the next pro-
grammed item.
1
5
4
3
2
6
790
CANCEL
SLEEP
AUTO OFF
MUTING
8
RANDOM
PROGRAM
REPEAT
CH LEVEL
TEST
CH SELECT
PRO LOGIC
EQ
S.WOOFER
12
3
456
7
10
CANCEL RANDOM
PROGRAM
REPEAT
VOLUME
DISC
PROGRAM
DISC
12
3
45
7908
12
3
456
7
10
PROGRAM
4
2
3
5
1
6
CANCEL
Specified disc number
Indicates program mode
Program order
Specified track number
Press [CANCEL].
Select the track with [ ] or
[ ], and press [CANCEL] within
3 seconds.
Press [ ].
From the last
programmed track
A specified track
only
All tracks