Filter
Top Products
RQT5324
21
You can use either deck 1 or deck 2 for tape playback.
1. Press [TAPE DECK 1/2].
The power will come on automatically.
If the unit was off and a cassette was loaded, play will start auto-
matically (One touch play function).
2. Press [ DECK 1 OPEN ] or [ DECK 2 OPEN]
and insert the tape.
Insert the tape with the exposed tape facing down.
Close the holder by hand.
3. Press [REV MODE] to select the reverse mode.
Every time you press the button;
: One side is played, then playback stops automatically.
: Both sides (front side reverse side) are played one time
each, then playback stops automatically.
: Both sides are played 8 times each, then playback stops
automatically.
4. Press [ ] or [ ] to start playback.
[ ]: The forward side (front side) will play.
[ ]: The reverse side will play.
5. Turn [VOLUME] to adjust the volume level.
To stop tape playback
Press [ ].
To change the deck to be used
Press [TAPE DECK 1/2] to select the deck you want to use when you
load cassettes into both decks.
To listen to 2 tapes consecutively
Load a tape into each deck and select . Both tapes will be played
8 times each.
Note
Playback is momentarily interrupted while playing back tapes if you
open the other deck.
Listening to tapes
Types of tapes which can be played correctly:
The unit automatically identifies the type of tape.
1
5
4
3
2
Deck in use
Front side
4
5
1
2
3
Tape direction
EPYT/NOITISOPLAMRON I
EPYT/NOITISOPHGIH II
E IVPYT/NOITISOPLATEM
Tape deck operation