Filter
Top Products
RQT5324
31
Using the timer
Using the play timer
Preparations
• Switch on the power.
• Make sure that you have completed “Setting the time” on page 13.
The figure shows how to set the play timer to play from 6:30 a.m. to
7:40 a.m.
1. Press [CLOCK/TIMER] to select “ PLAY”.
Every time you press the button;
2. “ON” time setting
(Within 8 seconds or so)
Press [TUNE/TIME ADJ ( or )] to select the starting time.
Press [CLOCK/TIMER].
3. “OFF” time setting
Press [TUNE/TIME ADJ ( or )] to select the ending time.
Press [CLOCK/TIMER].
4. Source selection
Select the desired source and then prepare for play-
ing.
To play CD(s)
Press [CD] and insert CD(s).
If more than 1 CD is loaded
Press [CD 1] – [CD 5] to select the CD you want to hear first, and
press [ ].
Note
Disc selection does not become part of the timer memory.
To play tape(s)
Press [TAPE DECK 1/2] and insert tape(s).
If tapes are loaded in both decks, playback will start from deck 2.
To play the radio
Press [TUNER BAND] and tune in the desired station.
To play the external unit
Press [AUX].
5. Play volume setting
Turn [VOLUME] to adjust the playback volume.
6. Press [ PLAY/ REC] to select “ PLAY”.
Every time you press the button;
7. Press [ , POWER] to switch off the power.
The timer play will start at the preset time with volume increasing
gradually up to the volume level you preset.
To switch the timer OFF
Press [ PLAY/ REC] and check “ PLAY” goes out.
1
7
5
6
3
2
2, 3
5
7
6
1, 2, 3
CLOCK PLAY REC Previous display
PLAY REC (off)
Timer and others