Filter
Top Products
RQT5324
24
Recording from compact discs
Sequential recording
Preparation:
1. Insert the tape to be recorded on into deck 2.
Tape direction is automatically set to “
”.
Change the tape direction if you want to start recording from the
reverse side. ( page 22)
2. Insert the CD.
1. Press [CD 1] – [CD 5] to select the disc.
Press [ ] to stop the CD.
2. Press [REV MODE] to select the reverse mode.
Every time you press the button;
:
One side is recorded, then recording stops automatically.
, : Both sides (front side reverse side) are recorded,
then recording stops automatically.
3. Press [ REC/STOP] to start recording.
• If you selected in step 2, the direction will automatically
change to when recording starts.
• The recording will proceed from the first track on the selected
CD and will continue on through the last track of the final disc.
• The tape deck stops automatically when the CD is finished.
To stop recording
• To add a 4 second silent interval before stopping
Press [ ]. The CD will stop automatically too.
• To stop recording without a silent interval
Press [ REC/STOP]. The CD will stop automatically too.
To record programmed tracks
1. After step 2, program the track you want (performs steps 2 – 5 on
page 19).
2. Press [ REC/STOP] to start recording.
1
3
2
1
2
3
1
Tape direction
Recording operation