Filter
Top Products
V
O
L
U
M
E
S
O
U
R
C
E
P
U
S
H
M
E
N
U
PW
R
TA
AF
DISP
CQ-DFX602N
BAND
SET
/
APM
TUN
E
TRACK
OPEN
P·SET
CD RECEIVER WITH FULL DOT MATRIX DISPLAY
DISC
SRC
TA
DISP
TUN
E
TRACK
BAND
12
CQ-DFX602N
9
E
N
G
L
I
S
H
Radio Data System (RDS) (continued)
Traffic Announcement (TA)
Traffic Announcement (TA) Mode
[BAND]
(Set)
TP Seek Tuning
When TA ON is selected, only TP
station will be searched.
Press and hold [[] or []] for
more than 0.5 seconds, then
release. Seeking will start.
TP Auto Preset Memory
When TA ON is selected, only TP
stations will be memorized
automatically. (a Page 9 for auto
preset memory)
TP Auto Search
When reception of a TP station is
poor, TP Auto Search will auto-
matically search for a TP station
with better reception. (Enabled
only in the Muting in TA mode.)
Muting in TA Mode
To listen to only traffic announcements. While listening to an FM
station which is not currently broadcasting traffic announcement,
turn the [VOLUME] counterclockwise or press [VOL{] (remote
control) to set the volume to 0. The traffic announcement will be
output at the TA volume level.
[TA]
(TA mode)
[VOLUME]
(Volume)
[VOL}] [VOL{] (Volume)
[]] [[]
(TP seek tuning)
[BAND]
(Set)
Lights when
TA is on
TA Mode
TA Standby Mode
When set to TA on with the unit in another mode (CD, CD changer,
AUX), it will automatically switch to radio mode and output the traffic
announcement.
When the traffic announcement has finished, the unit will return to
the previous mode.
FM Menu Display
TA Volume Set
(Menu Setting)
Traffic announcements are broadcast at the TA volume level.
q Press [MENU] / [SEL] to display the menu.
w Press [}] or [{] to select TA VOL.
e Press [BAND] to set the current volume level as the TA
volume level.
Note: Press [MENU] / [SEL] or [DISP] to return to the regular mode.
Traffic Announcement receiving display
Lights when TP station is received
[]] [[] (TP seek tuning)
[SEL]
(Menu/Return)
[DISP]
(Return)
[DISP]
(Return)
[}] [{] (Select)
[MENU] (Menu/Return)
[}] [{]
(Select)
Press [TA] on the main unit to switch the TA mode on.
(Press again to switch the TA mode off.)
TA ON :
If the station received is not a TP station, the unit
automatically searches for a TP station to tune in to it.
When the TP station received begins a traffic
announcement, you can hear it from the unit.
PUSH