Filter
Top Products
2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
4 Unpacking
5 Front Panel Controls
7 Rear Panel Connections
10 Main Remote Control Functions
14 Zone II Remote Control Functions
15 Installation and Connections
15 Audio Connections
15 Video Connections
16 SCART A/V Connections
18 System and Power Connections
19 Speaker Selection
19 Speaker Placement
20 System Configuration
20 First Turn On
20 Using the On-Screen Display
20 System Setup
20 Input Setup
22 Audio Setup
22 Surround Setup
23 Night Mode Settings
24 Using EzSet/EQ
26 Manual Setup
27 Speaker Setup
28 Speaker Crossover Setting
29 Delay Settings
30 Output Level Adjustment
32 Additional Input Adjustments
33 Operation
33 Surround Mode Chart
35 Basic Operation
35 Source Selection
35 6/8-Channel Direct Input
35 Controls and Use of Headphones
36 Surround Mode Selection
36 Digital Audio Playback
36 Dolby Digital
37 DTS
37 PCM Audio Playback
37 HDCD
37 MP3 Audio Playback
38 Selecting a Digital Source
38 Digital Bitstream Indicators
38 Speaker/Channel Indicators
39 Night Mode
39 Tape Recording
39 Front Panel Input/Output Connections
40 Output Level Adjustment
With Source Signals
40 Dim Function
40 Memory backup
41 Advanced Features
41 Front Panel Display Fade
41 Display Brightness
41 Turn-On Volume Level
41 Semi-OSD Settings
42 Full-OSD Time Out Adjustment
42 Digital Auto-Poll Settings
42 Multiroom Operation
44 Tuner Operation
44 Basic Tuner Operation
44 Station Selection
44 Preset Tuning
45 RDS Operation
45 RDS Tuning
45 RDS Display Options
45 Program Search
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
EXAMPLE – (Synchro type) indicates a message that is displayed on the remote control’s LCD screen
1
– (number in a square) indicates a specific front-panel control
0
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
å
– (letter in an oval) indicates a button on the Zone II remote
46 Programming the Remote
46 Preprogrammed Code Entry
46 Configuring the Remote
47 Automatic Code Entry
47 Learning Commands
48 Learning Remote Codes for an Input
Selector
48 Device Priority
48 Changing Devices
49 Macro Programming
51 Punch-Through Configuration
52 Renaming
54 Resetting the Remote
54 Backlight Options
56 Troubleshooting Guide
56 Processor Reset
57 Technical Specifications
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product described
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3.1995+A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group International
01/05
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual.Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.