Filter
Top Products
Product
STB for ATSC
Connecting Jacks
ANT IN
F connector (75 ohm)
Smart ANT. Control
1-ANT Control jack
Video Output (component)
3-pin jacks (Y, Pb, Pr)
S-Video Output
Mini DIN 4-pin jack (75 ohm)
Video Output
1-pin jack, 1Vpp
Digital Video Output
1-DVI-D HDCP jack
Analog Audio Output
2-pin jacks (L, R)
450 mVrms (100k ohm)
Digital Audio Output
1-pin jack coaxial (Dolby Digital)
1-jack optical (Dolby Digital)
Power Source
120 VAC+/-10 %, 60 Hz+/-0.5 %
Power Consumption
20 W (Power on), Less than 1 W (Power off)
ENERGY STAR adopted.
Operating Condition
41 F° (5 C°) - 104 F° (40 C°)
Dimensions (W x H x D)
11-1/16" x 2-5/16" x 10-1/8"
(281 mm x 59 mm x 257 mm)
Weight
4.0 lbs. (1.8 Kg)
Designs and Specifications are subject to change
without notice.
ATSC - Advanced Television Systems Committee:
This group is working to establish the standards for
digital television broadcasting and digital television
equipment for both SDTV and HDTV.
Audio map:
Audio languages from a broadcasting station are
stored in an audiomap.
Audio output jack:
Audio output jack is located on the rear panel of STB
and send audio signals to other devices.
Autoscan:
AUTOSCAN can receive available digital channels
and store these in a channel map.
Component video output jacks (Y/ Pb/ Pr):
The component video output jacks on the rear panel
of STB provide better picture than VIDEO and S-
VIDEO. You can select the video resolution by using
the RESOLUTION SELECT switch.
Glossary and AcronymsSpecifications
64
EN
1A23
Others
ST300UA.qxd 04.8.3 1:13 PM Page 64