Filter
Top Products
15
EN
1A23
TV/Monitor Connections
Connection to a TV or monitor
3 TV/Monitor
Connections
1 Refer to "Antenna Connections" to connect the STB to the Smart Antenna (or a different one if you wish).
2 Use a DVI (DVI-D) video cable to connect the DVI-D HDCP OUT jack on the STB to the DVI input jack
on your television.
NOTE:
Connect to a DVI input jack that conforms to EIA-861 and HDCP. Some HD Monitors designed for PC applications
using the DVI-D jack may not work with this connection. Refer to your television’s manual for details.
3 Switch the Output selection switch (DVI, COMP.) to "DVI".
4 Switch the RESOLUTION SELECT switch (1080i/720p/480p) to suit your television.
Refer to your television’s manual for details.
5 Plug the AC power cord of the television into the AC outlet and turn the television on.
6 Switch the input mode of the television to that corresponding to the DVI input jack.
Refer to your television’s manual for details.
7 Plug the AC power cord of the STB into the AC outlet and turn it on.
ST300UA.qxd 04.8.3 1:12 PM Page 15