Onkyo TX-SR803/803E Stereo Receiver User Manual


 
95
Specification
Amplifier Section
Video Section
Tuner Section
FM
AM
General
Video Inputs
Video Outputs
Audio Inputs
Audio Outputs
Specifications and features are subject to change without
notice.
Power Output
TX-SR803/803E:
2 channels driven: North American: 105 W + 105 W
(8 , 20 Hz–20 kHz, FTC)
European: 140 W + 140 W
(6 , 1 kHz, DIN)
Others: 170 W + 170 W
(6 , 1 kHz, JEITA)
TX-SR703/703E/8370:
2 channels driven: North American: 100 W + 100 W
(8 , 20 Hz–20 kHz, FTC)
European: 130 W + 130 W
(6 , 1 kHz, DIN)
Others: 160 W + 160 W
(6 , 1 kHz, JEITA)
Dynamic Power
TX-SR803/803E: 240 W + 240 W (3 , Front)
180 W + 180 W (4 , Front)
125 W + 125 W (8 , Front)
TX-SR703/703E/8370:230 W + 230 W (3 , Front)
170 W + 170 W (4 , Front)
115 W + 115 W (8 , Front)
THD (Total Harmonic
Distortion) 0.08% (Power Rated)
Damping Factor 60 (Front, 1 kHz, 8)
Input Sensitivity and
Impedance 200 mV/ 47 k (LINE)
2.5 mV/47 k (PHONO MM)
Output Level and
Impedance 200 mV/ 470 (REC OUT)
Phono Overload 70 mV (MM 1 kHz, 0.5%)
Frequency Response 10 Hz–100 kHz/ +1 dB-3 dB (LINE)
Tone Control ±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio 106 dB (LINE, IHF-A)
80 dB (PHONO, IHF-A)
Speaker Impedance 4
– or 6
Input Sensitivity/Output
Level and Impedance 1 Vp-p /75 (Component and S-Video Y)
0.7 Vp-p /75 (Component Pb/Cb,Pr/Cr)
0.28 Vp-p /75 (S-Video C)
1 Vp-p /75 (Composite)
Component Video
Frequency Response 5 Hz – 100 MHz
Tuning Frequency
Range North American: 87.5 MHz– 107.9 MHz
Other: 87.5 MHz– 108.0 MHz
Usable Sensitivity Stereo: 22.2 dBf (75 IHF)
Mono: 15.2 dBf (75 IHF)
Signal to Noise Ratio Stereo: 67 dB (IHF-A)
Mono: 73 dB (IHF-A)
THD Stereo: 0.5% (1 kHz)
Mono:0.3% (1 kHz)
Frequency Response 30 Hz–15 kHz / ±1 dB
Stereo Separation 40 dB (1 kHz)
Tuning Frequency
Range North American: 530 kHz–1710 kHz
European: 522 kHz–1611 kHz
Asian: 530/522 kHz–1710/1611 kHz
Usable Sensitivity 300 µV/m
Signal to Noise Ratio 40 dB
THD 0.70%
Power Supply North American: AC 120 V, 60 Hz
Australian and European:
AC 230-240 V, 50 Hz
Others: AC 120/220-240 V, 50/60 Hz
AC 230-240 V, 50Hz
AC 220-230 V, 50/60 Hz
Power Consumption North American: 7.5 A
Others: 680 W
Standby Power
Consumption North American: 0.1 W
Australian and European: 0.2 W
Others: 0.5 W
Dimensions
(W
× H × D) 435 × 173.5 × 430 mm
17-1/8"
×
6-13/16"
×
16-15/16"
Weight North American: 13.3 kg
29.3 lbs.
European: 13.5 kg
29.8 lbs.
Others: 13.3 kg
29.3 lbs.
HDMI TX-SR803/803E: IN1, IN2
Component IN1, IN2, IN3
S-Video DVD, VIDEO1, VIDEO2, VIDEO3,
VIDEO4
Composite DVD, VIDEO1, VIDEO2, VIDEO3,
VIDEO4
HDMI TX-SR803/803E: OUT
Component OUT
S-Video MONITOR OUT, VIDEO1, VIDEO2
Composite MONITOR OUT, VIDEO1, VIDEO2
Digital Inputs Optical: 5 (1 on Front Panel)
Coaxial: 2
Analog Inputs DVD (MULTICHANNEL), VIDEO1,
VIDEO2, VIDEO3, VIDEO4, TAPE, CD,
PHONO
Multichannel Input 7.1 ch (DVD)
Digital Output Optical: 1
Analog Outputs TAPE, VIDEO1, VIDEO2, ZONE2
Multichannel Pre
Outputs 7.1 ch
Speaker Outputs L, R, C, SL, SR, SBL, SBR
ZONE2 (L, R)
Phones 1
RS232 1 (Other than North American and
Australian)
IR Input/Output TX-SR803/803E: 1/1
TX-SR703/703E/8370: 1/0
12 V Trigger Out ZONE2