![](http://pdfasset.owneriq.net/5/4b/54b94602-517a-437a-9379-3a45ca3156f9/54b94602-517a-437a-9379-3a45ca3156f9-bg34.png)
52
First Time Setup
—Continued
If you connect an -compatible Onkyo MiniDisc
recorder or CD recorder to the TAPE IN/OUT jacks, for
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
Changing the TAPE/MD/CDR Display
1
Press the [TAPE] input selector
button so that “TAPE” appears
on the display.
2
Press and hold down the [TAPE]
input selector button (about 3
seconds) to set the display.
Repeat this step to select TAPE, MD, or
CDR.
1, 2
TAPE
TAPE