Filter
Top Products
27
Connecting the AV Receiver
—Continued
Monitor Out
■
Using Composite Video
Use a composite video cable to connect the AV
receiver’s V MONITOR OUT jack to a composite video
input on your TV, as shown.
■
Using S-Video
Use an S-Video cable to connect the AV receiver’s
S MONITOR OUT jack to an S-Video input on your TV,
as shown.
■
Using Component Video
Use a component video cable to connect the AV
receiver’s COMPONENT VIDEO OUT jacks to a com-
ponent video input on your TV, as shown.
Audio Connections
These connections will allow you to listen to audio from
your TV via the AV receiver.
If your TV doesn’t have an audio output, connect the AV
receiver to your VCR and use its tuner (see page 30).
■
Using Coaxial or Optical Connections
If you connect to a digital audio input, you’ll need to
assign it (see page 43).
• Use an optical digital audio cable to connect one of the
AV receiver’s OPTICAL DIGITAL IN jacks to an
optical output on your TV, as shown.
OR
• Use a coaxial digital audio cable to connect one of the
AV receiver’s COAXIAL DIGITAL IN jacks to a
coaxial output on your TV, as shown.
■
Using Analog Connections
If your TV doesn’t have a digital audio output, or you
want to record from it, you’ll need to make the following
analog audio connection.
Use an analog audio cable to connect the AV receiver’s
VIDEO 3 IN L/R jacks to an analog audio output on
your TV, as shown.
Connecting Your TV or Projector
TV, projector,
etc.
MONITOR
OUT
S
S VIDEO IN
TV, projector,
etc.
YPB PR
COMPONENT
VIDEO IN
P
COMPONENT VIDEO
B
PR
Y
TV, projector,
etc.
OPTI-
CAL
IN
COAXIAL
IN 2
DIGITAL OUT
OPTICAL
DIGITAL OUT
COAXIAL
TV, projector,
etc.
Connect one or the
other
IN
VIDEO 3
AUDIO
OUTPUT
L
R
TV, projector,
etc.