Filter
Top Products
45
Turning On the AV Controller
For non-North American models: To completely shut down the AV controller, set the [POWER] switch to the OFF
position ( ).
ON/STANDBY ON/STANDBY
POWER
STANDBY indicator
• North American model • Other models
STANDBY indicator
ON
RECEIVER
STANDBY
Turning On and Standby
1
Set the [POWER] switch to the ON position ( ).
(Skip this step if you have the North American model.)
The AV controller enters Standby mode, and the STANDBY indicator comes on.
2
On the AV controller, press the [ON/STANDBY] button.
On the remote controller, press the [RECEIVER] REMOTE MODE button,
followed by the [ON] button.
The AV controller comes on, the display lights up, and the STANDBY indicator goes
off.
Pressing the remote controller’s [ON] button again will turn on any components con-
nected via .
To turn the AV controller off, press the [ON/STANDBY] button, or press the remote
controller’s [STANDBY] button. The AV controller will enter Standby mode. To pre-
vent any loud surprises the next time you turn on the AV controller, turn down the
volume before you turn it off.
Remote
controller
AV controller
or
Up and Running in a Few Easy Steps
To get your system up and running with the minimum of fuss, here’s a few pointers to help you configure the AV
controller before you use it for the very first time. These settings only need to be made once.
■ Do the automatic speaker setup—this is essential!
See “Automatic Speaker Setup (Audyssey MultEQ
®
XT)” on
page 58.
■ Did you connect your TV to an HDMI OUT or COMPONENT
VIDEO MONITOR OUT 1 or 2?
If you did, see “Monitor Out Setup” on page 49.
■ Did you connect a component to an HDMI input,
component video input, or digital audio input?
If you did, see “Video Input Setup” on page 50, “Component Video
Setup” on page 52, or “Digital Audio Input Setup” on page 53
respectively.
■ Did you connect an Onkyo MD recorder, CD recorder, or RI
Dock?
If you did, see “Changing the Input Display” on page 57.
OPTICAL
COAXIAL
Y
P
B
PR
HDMI
OUT IN
TAPE
MD recorder, CD recorder,
RI Dock