Onkyo PR-SC886 Stereo Receiver User Manual


 
101
Advanced Setup—Continued
]
You can change various audio settings by pressing the
[DIRECT] button.
Optimizer
The Music Optimizer function enhances the sound qual-
ity of compressed music files. Use it with music files that
use “lossy” compression, such as MP3.
Note:
The Music Optimizer function only works with PCM
digital audio input signals with a sampling rate below
48 kHz and analog audio input signals. The Music Opti-
mizer is disabled when the Pure Audio or Direct listen-
ing mode is selected.
With the Re-EQ function, you can compensate a
soundtrack whose high-frequency content is too harsh,
making it more suitable for home theater viewing.
This function can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Pro
Logic II Movie, Dolby Pro Logic IIx Movie, Dolby Dig-
ital Plus, Dolby TrueHD, DTS, DTS-ES, DTS Neo:6
Cinema, DTS-HD High Resolution Audio, DTS-HD
Master Audio, DTS 96/24, THX Cinema, THX Sur-
round EX, THX Ultra2 Cinema, Neural THX, DSD and
Multichannel.
Using the Music Optimizer
1
Remote
controller
Press the [RECEIVER] REMOTE
MODE button , press and hold
down the [DIRECT] button.
The setting item appears on the display.
2
Use the Left and Right [ ]/[ ]
buttons to change the setting.
Repeat this step for the other settings.
SETUP
DIRECT
RECEIVER
L NIGHT
Re-EQ
ENTER
Off: Music Optimizer off (default).
On: Music Optimizer on.
Using the Re-EQ Function
Press the [RECEIVER] REMOTE
MODE button, followed by the
[Re-EQ] button.
Press the [Re-EQ] button again to turn
off the Re-EQ function.