Filter
Top Products
29
Connecting the AV Controller—Continued
By connecting both the audio and video outputs of your DVD player and other AV components to the AV controller,
you can switch the audio and video signals simultaneously simply by changing the input source on the AV controller.
The AV controller supports several connection formats for compatibility with a wide range of AV equipment. The format
you choose will depend on the formats supported by your other components. Use the following sections as a guide.
For video components, you must make an audio connection and a video connection.
Video Connection Formats
Video equipment can be connected to the AV controller by using any one of the following video connection formats:
composite video, S-Video, component video, or HDMI, the latter offering the best picture quality.
The AV controller can upconvert and downconvert between video formats, depending on the “Monitor Out” setting,
which generally determines whether video signals are upconverted for the component video output or the HDMI out-
puts.
For optimal video performance, THX recommends that video signals pass through the system without upconver-
sion (e.g., component video input through to component video output). It’s also recommended that you set the
“Immediate Display” preference to “Off” (see page 109), the “Picture Adjust” setting to the default (see
page 104), and the “Resolution” setting to “Through” (see page 49).
■ “Monitor Out” Setting Set to “HDMI Main” or “HDMI Sub”
With the “Monitor Out” setting set to “HDMI
Main” or “HDMI Sub” (see page 46), video
input signals flow through the AV controller as
shown, with composite video, S-Video, and
component video sources all being upcon-
verted for the respective HDMI output. Use the
“HDMI Main” or “HDMI Sub” setting if
you connect the AV controller’s HDMI OUT
MAIN or HDMI OUT SUB, respectively, to
your TV.
The composite video, S-Video, and component
video outputs pass through their respective
input signals as they are.
Connecting Both Audio & Video
On
Standby
On
Power
O
f
f
Seven Channel Amplifier
RDA-7.1
: Signal Flow
Video
Video
Audio
Power amplifier and speakers
(see page 26 for hookup details)
DVD player, etc.
TV, projector,
etc.
Audio
Which Connections Should I Use?
IN
MONITOR OUT
DVD player, etc.
AV controller
TV, projector, etc.
Composite S-Video Component
Video Signal Flow Chart
HDMI
Composite S-Video Component
HDMI