Filter
Top Products
35
Connecting the AV Controller—Continued
Notes:
• The AV controller must be turned on for recording. Recording is not possible while it’s on Standby mode.
• If you want to record directly from your TV or another video source without going through the AV controller, connect
the audio and video outputs from your TV or other video component directly to the recording VCR/DVD recorder’s
audio and video inputs. See the manuals supplied with your TV or VCR/DVD recorder for details.
• Video signals connected to composite video inputs can only be recorded via the VCR/DVR OUT V jack. So if your
source TV or VCR is connected to a composite video input, the recording VCR/DVR must be connected to the
VCR/DVR OUT V jack. Likewise, video signals connected to S-Video inputs can only be recorded via the VCR/DVR
OUT S jack. So if your source TV or VCR is connected to an S-Video input, the recording VCR/DVD recorder must
be connected to the VCR/DVR OUT S jack.
Connecting a VCR or DVD Recorder for Recording
Connection AV controller Signal flow VCR or DVD recorder
VCR/DVR OUT S
⇒
S-Video input
VCR/DVR OUT V
⇒
Composite video input
VCR/DVR OUT L/R
⇒
Audio L/R input
DIGITAL OPTICAL OUT
⇒
Digital optical input
Step 1: Video Connection
Choose a video connection that matches your VCR or DVD recorder ( or ), and then make the connection. The
video source to be recorded must be connected to the AV controller via the same type of connection.
A B
Step 2: Audio Connection
Choose an audio connection that matches your VCR or DVD recorder ( or ), and then make the connection.
a b
A
B
a
b
S VIDEO
IN
AUDIO
IN
VIDEO
IN
LR
OPTICAL
IN
b
A
a
B
VCR,
DVD recorder