Filter
Top Products
15
En
Using Dipole Speakers
You can use dipole speakers for the surround and surround
back speakers. Dipole speakers output the same sound in two
directions.
Dipole speakers typically have an arrow printed on them to
indicate how they should be positioned. The surround dipole
speakers should be positioned so that their arrows point
toward the TV/screen, while the surround back dipole speak-
ers should be positioned so that their arrows point toward
each other, as shown.
Front speakers
Center speaker
Surround speakers
Subwoofer(s)
Surround back speakers
Front high speakers
Front wide speakers
Connecting the Powered Subwoofers
Using a suitable cable, connect the AV controller’s
SW1 PRE OUT, SW2 PRE OUT to an input on
your powered subwoofer, as shown. If your sub-
woofer is unpowered and you’re using an external
amplifier, connect the SW1 PRE OUT, SW2 PRE
OUT to an input on the amp.
You can connect the powered subwoofer with each
jacks respectively. Level and distance can be set indi-
vidually for each output. If you use one subwoofer,
connect it to SW1 PRE OUT.
You can also connect a powered subwoofer to the AV
controller’s balanced SUBWOOFER 1 PRE OUT,
SUBWOOFER 2 PRE OUT jack by using a bal-
anced XLR cable.
You can connect the powered subwoofer with each
jacks respectively. Level and distance can be set indi-
vidually for each output. If you use one subwoofer,
connect it to SUBWOOFER 1 PRE OUT.
TV/screen
TV/screen
Dipole speakers
Normal speakers
LINE INPUT
LINE INPUT
LINE INPUT
LINE INPUT
Powered subwoofer
LINE INPUT LINE INPUT
PRE OUT
SUBWOOFER 1
SUBWOOFER 2
INPUT
INPUT
Powered subwoofer
Balanced XLR cable
Balanced XLR cable