Onkyo PHC-5 Home Theater System User Manual


 
8
Connections (continued)
Connecting the subwoofer, SKW-320, SKW-310, etc.
Connect the subwoofer Optional Onkyo subwoofer SKW-320, SKW-310, etc. to the SUBWOOFER PREOUT jack on the PHC-5.
You can connect any subwoofer with a crossover frequency between 100Hz and 200Hz. Place the subwoofer in the optimum position.
The location of the subwoofer significantly changes the effects. In most cases, place it in the corner of the room to get the best results.
Refer to the instruction manual that came with the subwoofer for more information.
Connecting to VIDEO/AUX INPUT jacks
Use the VIDEO or AUX input jacks for connection in the following cases:
To connect another audio or video device.
Lower the volume level on the PHC-5 before you change an input source using the INPUT SELECTOR, since the input
level of a device such as CD player connected to the VIDEO or AUX input jacks may be different from the input level of the
TV and selecting a different input source may produce a loud sound.
To connect your VCR directly to the PHC-5, since your TV does not have audio output jacks.
To connect your VCR directly to the PHC-5, since your TV has “variable” audio output jacks. (Refer to the “CAUTION” on
page 7.)
To connect your VCR directly to the PHC-5, since your TV outputs audio signals during programmed recording on the VCR
even if the power to the TV is turned off. (Refer to the “CAUTION” on page 7.)
Use the cable included in the device for connection. Connect the stereo audio connection cable as follows:
Plug the cables securely. Incomplete connection may cause noise or malfunction.
Refer to the manual for your AV device for more information on AV output connections.
PHC-5
VOLUME
INPUT
AUX
VIDEO
TV
LEVELMAXMIN
FAR
MID
NEAR
DISTANCE
NORMAL
STANDBY/ON POWER
OFF
ON
Therter-Dimensional
WIDE
PANORAMA
SURROUND
VIRTUAL
LINE INPUT
L
R
PHC-5
: Signal flow
Included
We recommend you connect a subwoofer to take the best advantage of the virtual
surround effects.
Subwoofer with built-in
(SKW-320,
SKW-310, etc.)
amplifier (active)
Monaural audio connection cable
You may connect the cable to either L or R
input, if applicable.
TIP
To the audio output L ch. jack of the device...white
To the audio output R ch. jack of the device...red
white...PHC-5’s AUX or VIDEO input L ch. jack
red...PHC-5’s AUX or VIDEO input R ch. jack
PHC-5
VOLUME
INPUT
AUX
VIDEO
TV
LEVELMAXMIN
FAR
MID
NEAR
DISTANCE
NORMAL
STANDBY/ON POWER
OFF
ON
Therter-Dimensional
WIDE
PANORAMA
SURROUND
VIRTUAL
Audio Output
Audio Output
L
R
L
R
: Signal flow
PHC-5
CD player, MD player etc.
VCR, LD player or DVD player etc.