Onkyo TX-8222 Stereo System User Manual


 
7
Getting to Know the Receiver
—Continued
Some button number sections (such as
9
and
K
)
contain multiple button descriptions because the name
and function vary according to the model or shipping
destination. Refer to the description corresponding to
your model.
For detailed information, see the pages in parentheses.
A
STANDBY/ON button (20)
Sets the receiver to On or Standby.
B
SPEAKERS A and B switches (21)
Turn speaker sets A and B on or off.
C
PURE AUDIO button and indicator (23)
Selects the Pure Audio listening mode. The
indicator lights up and the display disappears when
this mode is selected.
D
DIRECT button (23)
Outputs the original sound source without applying
any effects.
E
Remote-control sensor (10)
Receives control signals from the remote controller.
F
DISPLAY (30)
Displays various information about the currently
selected input source.
G
TUNING UP/DOWN buttons (26, 29)
When AM, FM or SAT RADIO is selected, the
TUNING [UP ]/[ DOWN] buttons are used for
radio tuning.
H
DIRECT TUNING button (26)
When you know the frequency for the station you
want to listen to, you can select the station by
entering the frequency directly using this button and
number buttons. When SAT RADIO is selected, you
can select the channel number.
I
CATEGORY button
Used to select a category for Satellite Radio
stations.
PRESET [ ] button (27)
Selects a station from ones you preset.
CHARACTER button
Used to label the FM or AM station preset number.
RT/PTY/TP button (29)
On the European model, this is the RT/PTY/TP
button, and its used with RDS (Radio Data
System). See Using RDS (European Models
Only) on page 28.
J
Number buttons (26, 27, 30)
Used to select a station by entering the frequency
directly or to label the station preset number.
K
ENTER button
Used to select satellite radio stations.
PRESET
[]
button (27)
Selects a station from ones you preset.
DIMMER button (22)
Adjusts the display brightness.
SCAN
button (29)
Used to nd a station in RDS broadcasting.
L
CHARACTER
button
Used to label the FM or AM station preset number.
M
DIMMER button (22)
Adjusts the display brightness.
N
MASTER VOLUME control (21)
Sets the volume of the receiver.
O
BALANCE control (23)
This control is for adjusting the sound level balance
between the left and right channel for speakers and
headphones.
P
TREBLE control (23)
This control is for adjusting the level of treble
sounds.
Q
BASS control (23)
This control is for adjusting the level of bass
sounds.
R
TUNING MODE button (26, 27)
Selects the Auto or Manual tuning mode for AM
and FM radio.
S
MEMORY button (27)
Used when storing or deleting radio presets.
T Input selector buttons (21, 24, 26)
Select the input sources.
The TAPE 2 button is also used to monitor the
recorded sound.
U STANDBY indicator (20)
Lights up when the receiver is on Standby and
ashes while a signal is being received from the
remote controller.
V PHONES jack (22)
This 1/4-inch phone jack is for connecting a
standard pair of stereo headphones for private
listening.