Filter
Top Products
23
Before Using
Connections Other Information
Operations
CD-dubbing (System operation)
CD-dubbing (System operation)
Setting the CD dubbing mode
You can set either "Album" or "Fadeout" CD
dubbing mode. In the Album CD dubbing mode,
the track being recorded will be discarded if the
end of MD is reached during recording. In the
Fadeout CD dubbing mode, however, a fadeout
effect will be applied to the last but incompletely
recorded track of MDs.
The CD dubbing mode setting is possible only
when the MD recorder is stopped.
• When your MD-105X is configured into a
system with Onkyo Separate Collection series
components (A-905X and C-705X), recording
from the CD dubbing can be started simply
pressing the CD DUBBING button on the MD-
105X.
• To perform CD dubbing, your CD player must
be connected through an optical cable to the
DIGTAL INPUT 1 terminal located on the rear
panel of the MD recorder. (for details, see the
section "System connections" of the A-905X
Instruction Manual.)
• For the normal recording procedure, see
"Recording from an analog source" on
page25 or "Recording from a digital source"
on page28.
Note
CD-dubbing is not available with the A-905,
C-705 and C-707CH.
1 Load the CD in the CD player.
See the C-705X CD player instruction
manual for how to load CDs.
2 Load recordable MD in the MD105X.
To check the time remaining for recording...
DISC LOADING MECHANISM0
REC
DISPLAY EDIT/NO
MINDISC RECODER
AMCS
PUSH TO ENTER
STANDBY/ON
STANDBY
CD
DUBBING
INPUT
ANALOG
ST D1 D2MO
YES
MD-
105
X
DISC LOADING MECHANISM0
REC
DISPLAY EDIT/NO
MINDISC RECODER
AMCS
PUSH TO ENTER
STANDBY/ON
STANDBY
CD
DUBBING
INPUT
ANALOG
ST D1 D2MO
YES
MD-
105
X
EDIT/NO
YES
CD-DUBBING
INPUT
12345
678910
11 12 13 14 15
010 22040
R
6
L
15
ANALOG IN
When the MD recorder is stopped,
pressing the DISPLAY button changes the
display as follows.
The number of tracks on MD and its total
recorded time
↓
Remaining recording time on MD
↓
Disc name ("No Name" when not set)
3 Set the INPUT selector to
"Digital In1" (D1) position.
The digital input source 1 is now selected.
Note
Cd-dubbing is not possible when "Analog In"
or "Digital In 2" is shown on the display.
12345
678910
11 12 13 14 15
DIGITAL IN
010 22040
R
6
L
15
1
ANALOG
ST D1 D2MO