Filter
Top Products
4-22 ChartView Software Reference ChartScan User’s Manual
Upload Available
Scans
(Ctrl + U) (manual
control)
Enables ChartView to access device memory for all scans currently available. This function only uploads
scans that are currently available.
Upload Scans
Until Done
Enables ChartView to access device memory and upload scans until scanning is complete.
Window
Bar Graph Meters
Selecting Bar Graph Meters from ChartView’s Window pull-down menu brings up the Bar Graph window.
This window displays several channels in bar graph format. To activate the display, select the Start button
in the meter toolbar. At least one meter must be assigned to an active (On) channel. You can select to
view up to 32 meters at a given time. (See page 4-28).
Analog Meters
Selecting Analog Meters from ChartView’s Window pull-down menu brings up the Analog
Meters window. This window displays several channels in a dial/gage format. To activate the
display, select the Start button in the meter toolbar. At least one meter must be assigned to an
active (On) channel. You can select to view up to 32 meters at a given time. (See page 4-29).
Digital Meters
Selecting Digital Meters from ChartView’s Window pull-down menu brings up the Digital
Meters window to display several channels in numeric format. To activate the display, select
the Start button from the toolbar. At least one meter must be assigned to an active (On)
channel. You can select to view up to 32 meters at a given time. (See page 4-30).
PostView
post-acq
data viewer
The “PostView post acquisition data viewer” selection accesses the PostView program. This
independent program allows you to view waveforms recorded by data acquisition programs
such as ChartView, ChartView Plus, and TempView. PostView is detailed in Chapter 5 of this
manual.