Filter
Top Products
7
I. Installing the T2SIR in the Home
Connecting the Audio Outputs (Fig. 1)
The T2SIR has two independent audio outputs labeled A and B.
These are standard stereo RCA connections and can be
connected to any device designed to receive an analog stereo
audio signal.
Setting the Audio Outputs for NuVoNet or Standalone use
(Fig. 2)
The outputs A and B are individually set from the front panel
display of the T2SIR. When the Tuner is initially plugged into
an AC power source, a short setup wizard will appear on the
display. A message, Uninitialized State Detected (Press OK)
will appear. When OK is pressed, the prompt is to select a
regional tuning standard. The choices are USA/Canada,
Western Europe, Australia, and New Zealand. Use the Up and
Down arrows to highlight the appropriate choice and touch the
OK button to select this. Once regional tuning has been
selected, the display will prompt for the use of each output A
and B. Using the Up and Down arrows on the front panel, move
the highlight to the appropriate use of the Tuner output and
touch OK. The choices are Stand Alone, Source 1, Source 2,
Source 3, Source 4, Source 5, and Source 6. For any use other
than with the Essentia E6G or Grand Concerto Systems, select
Standalone. This will require IR or serial control of the T2SIR’s
functions. Highlighting the appropriate Source number input
for the NuVo system and touching the OK button sets NuVoNet
communication. Once Output A is set, the highlight will move
to Output B. For operation, both outputs A and B must be set as
Standalone or as a NuVoNet Source.
When the Tuner’s outputs are set, they will return to FM 87.9,
or the minimum FM band setting for the selected regional
tuning parameters. At this point the T2SIR is ready for either
NuVoNet communication or standalone use, depending on the
setting made for both outputs.
ANTENNA
IN
USE N V-T2FAA
ANT ENNA
L
AUDIO
R
TUNER A
SIRIUS
L
AUDIO
R
TUNER B
SIRIUS
SOURCE LINK
L
R
L
R
L
R
SOURCE INPUTS
TIP =L
RIN G=R
ZONE 2
VARI ABLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARI ABLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
VARIA BLE
OUT PUT
FIX ED
OUT PUT
TIP =L
RIN G=R
1 2 3 4 5
6
1 2 3 4 5
6
1 2 3
4
CON NECT TO
NV-I 8X
USE N V-SLC1
CAB LE
5
6
ZONE 1
VARI ABLE
OUT PUT
FIX ED
OUT PUT
SPE AKER
40W /6 OHMS X 2
LEF T RIGHT
ZONE 3
ZONE 4
SOURCE STATUS
SPE AKER
40W /6 OHMS X 2
LEF T RIGHT
SPE AKER
40W /6 OHMS X 2
LEF T RIGHT
SPE AKER
40W /6 OHMS X 2
LEF T RIGHT
Fig. 1
Fig. 2
MENU
BAND
OK
A/B
DISP
Uninitialized
State Detected
(Press OK)
MENU
BAND
OK
A/B
DISP
Regional Setup
US and Canada
Western Europe
Australia
MENU
BAND
OK
A/B
DISP
Set TunerA Mode
Standalone
Source 1
Source 2