Filter
Top Products
Numark HDCD1 - 26 – User’s Guide
EXAMPLE OF MIXING USING TWO CD PLAYERS
While playing a disc on PLAYER 1 load a disc into PLAYER 2 and select your next track, match its pitch to
the track playing on PLAYER1 and when you are ready, use the crossfader on your mixer to fade from
PLAYER 1 to PLAYER 2.
Select a song in PLAYER 1
and press PLAY.
Load a disc in PLAYER 2
and select a song and
press PLAY.
Set and edit a start cue
point on PLAYER 2
Check your new cue point
Do a MIX!
PLAYER 1
Load a disc and press the
OPEN/CLOSE button.
PLAYER 2
Load a disc and press the
OPEN/CLOSE button.
PLAYER 2
Press the Pause button of
PLAYER 2.
PLAYER 2
Listen with the monitor
and press the play button.
PLAYER 2
With a matching downbeat
from Player 1 press the
play button.
PLAYER 1
Select the track to be
played.
PLAYER 2
Select the track to be
played.
PLAYER 2
Press cue to start setting
cue point
PLAYER 2
Press the cue button then
play to be sure of the set
cue point.
PLAYER 2
If you are beat mixing,
turn on the pitch fader
and follow the directions
for beat matching.
PLAYER 1
Press the PLAY button
PLAYER 2
Press the PLAY button
PLAYER 2
Slowly set the right cue
point using the jog wheel.
PLAYER 2
Set the player to the Cue
point by pressing Cue
MIXER
When you are happy with
your mix, adjust your
mixer accordingly.