Filter
Top Products
Numark HDCD1 - 2 – User’s Guide
QUICK SETUP
1. Make sure all items listed below are included in the box.
2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3. Place unit in an appropriate position for operation.
4. Connect control cable jack 1 on the display unit to control cable jack 1 on the
player unit.
5. Connect control cable jack 2 on the display unit to control cable jack 2 on the
player unit.
6. Make sure all devices are turned off and all faders and gain knobs are set to
“zero”.
7. Connect inputs and outputs to your mixer.
8. Plug all devices into AC power.
9. Switch your equipment on in the following order:
• Audio input sources (i.e. HDCD1, turntables or CD players)
• Mixer
• Finally, switch on any amplifiers or output devices
10. Shut off your equipment in the reverse order that you powered it up:
• Switch off amplifiers
• Mixer
• Finally, shut off any input devices (HDCD1)
11. Go to http://www.numark.com for product registration.
More information about this product and others may be found at http://www.numark.com
Includes:
• HDCD1 Player Unit
• HDCD1 Control Unit
• Keyboard
• (2) control cables
• (2) RCA connection cables
• Software CD