Filter
Top Products
Call functions
22
3. To end the call or to cancel the call attempt, press the end key, or close the
device.
To search for a name or phone number that you have saved in Contacts, see
Search for a contact p. 38.
To access the list of dialed numbers, press the call key once in the standby mode.
To call the number, select a number or name, and press the call key.
1-touch dialing
Assign a phone number to one of the 1-touch dialing keys, 2 to 9. See 1-touch
dialing p. 40. Call the number in either of the following ways:
• Press a speed-dialing key, then the call key.
•If 1-touch dialing is set to On, press and hold a 1-touch dialing key until the
call begins. See 1-touch dialing in Call p. 48.
Enhanced voice dialing
To make a call you can say the name saved in the contact list of the device. Voice
commands are language-dependent. To set the language, see Voice recognition
language in Phone p. 48.
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
1. To make a call using voice dialing, in the standby mode, press and hold the
volume down key. A short tone is played, and Speak now is displayed.
2. Say the voice command clearly. If the voice recognition was successful, a list
with matches is shown. The device plays the voice command of the match on
the top of the list. If the result is not the correct one, scroll to another entry.
Using voice commands to carry out a selected device function is similar to
voice dialing. See Voice commands in My shortcuts p. 43.
■ Answer or decline a call
To answer an incoming call, press the call key, or open the device. To end the call,
press the end key or close the device.
To decline an incoming call, press the end key or close the device. To reject an
incoming call when the device is closed, press and hold a volume key.
FCC Draft
Model 3555c - 23 April 2007