Get started
13
For availability of approved enhancements, please check with your dealer. When
you disconnect the power cord of any enhancement, grasp and pull the plug, not
the cord.
1. Connect the charger to a wall
socket.
2. Connect the charger to your
device.
A CA-44 charging adapter can
be used with older charger
models.
If the battery is completely
discharged, it may take a few minutes before the charging indicator appears on
the display or before any calls can be made.
The charging time depends on the charger used. Charging a BL-5C battery with
the AC-3 charger takes approximately 2 hours and 20 minutes while the device is
in the standby mode.
■ Open and close the device
You open and close the device manually. When you open the fold of the device, it
opens up to approximately 165 degrees. Do not try to force the fold open more.
Depending on the Theme a tone sounds when you open and close the device.
■ Switch the device on and off
Warning: Do not switch the device on
when wireless device use is prohibited or
when it may cause interference or
danger.
To switch the device on or off, press and hold the
power key. See Keys and parts p. 16.
If the device asks for a PIN or a UPIN code, enter
the code (displayed as ****), and select OK.
FCC Draft
Model 3555c - 23 April 2007