Filter
Top Products
Figure 1. iC2 Remote Front View
1
4
2
5
3
4
CONTENTS
Check that your iC2 Home Theater Automation and Control System contains the following:
PARTS GUIDE
THE IC2 REMOTE
1) Master Keys - The eight Master Keys on the left side of the remote can be custom labeled
and will initiate the iC2’s automation functions when programmed via Niles QuickConfig. Pressing a
Master Key will prompt the HT-MSU to check the On/Off status of all of the components in the system
and issue the necessary commands so users can enjoy the selected source.
2) System Off Button - When pressed, the Remote will instruct the HT-MSU to check the
On/Off status of all the components in the system and issue the necessary commands to power down
the system.
3) Function Keys - These 36 Function Keys include the numeric, transport menu navigation
mute, volume and channel keys, and can be programmed to control the labeled Master Keys’ source
functions. The Function Keys can be programmed differently for each Master Key and provide
different functionality or sequences.
4) Backlight Button - This button is used to turn on the backlight for use in low light
conditions. The backlight will turn off after a short duration (about 10 seconds) and can be
programmed for activation.
5) Charging Indicator - The LED is blue when the charging power supply is plugged in and
the battery is charging normally. The LED is red if there is a problem with charging the battery.
• iC2 Remote + Battery
• iC2 Remote Charging Power Supply
• Master Key Label Sheet
• 10 iC2 Remote Master Key Caps
• System Configuration Worksheet
• Ferrite Bead
• Home Theater Main System Unit (HT-MSU)
• HT-MSU Power Supply
• RF Antenna
• Antenna Wall Bracket
• 10' (3 meters) Antenna Extension Cable
• End User Guide