Niles Audio iC2 Home Theater System User Manual


 
Figure 11. PC connection for programming
HT-MSU
CAT-5 CABLE
LAPTOP
Figure 12. PC connection for programming when using optional RFG.
HT-MSU
CAT-5 CABLE
LAPTOP
RFG
System Port
Keypad Port
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
17
3) If your system design involves a RFG and sharing sources wit
h a
future Niles multizone
receiver
(see System Configuration #3 in the System Design Considerations section), the
programming connection must be made on a f
uture Niles multizone receivers
’ Communication
and Control connection ports. Configuration of the entire system can be accomplished with one
connection and the Niles QuickConfig
Configuration wizard-based software “through”
future
Niles multizone receivers
.
A Worksheet is provided with the iC2 System and should be used to organize all of the information
an installer will need to configure the iC2 System. The iC2 System worksheet is also available on
the Niles website:
www.nilesaudio.com