Filter
Top Products
Windows Setup 4-21
To specify the setup parameters, the number of characters must not exceed the
limit as shown in the table below (a double-byte character is counted as two
characters):
Item Value specified Max. number
of characters
User Name 19
Group Name 20
Full Name 63
Creation of New Users
Explanation 47
Group Name 20 Creation of New Groups
Explanation (Group Name) 47
14. The confirmation dialog box will be
displayed. If you want to finish the
configuration settings, select [OK]. If
not, select [Cancel] to return to the
configuration screen.
ENTER key: Used to select [OK] or to decide each item.
ESC key: Used to select [Cancel].
15. Install the application to add.
In case of additionally installing the application
compatible with Express Setup, a message will
be displayed.
16. Follow the message, and remove the NEC
EXPRESSBUILDER CD-ROM from the CD-ROM drive.
If the setup parameter FD is used at this point, remove it from the floppy disk drive.
17. Set the Windows Server 2003 CD-ROM to
the CD-ROM drive.
The [Windows Server 2003 Setup] window
will be displayed.
18. Read the contents carefully. If you agree,
press the F8 key. If you do not agree, press
the F3 key.
IMPORTANT:
If you do not agree, the setup will be terminated and Windows Server 2003 will not
be installed.
Windows Server 2003 and the specified applications will be automatically installed. Log on
to the system.
If the configuration settings are correct and complete,
press [OK] to continue. If not, press [Cancel] to return
to the configuration screen(s).
OK Cancel