Filter
Top Products
Windows Setup 4-7
2. Prepare the installation from the module#0.
The location of the parts required for operations and check are show below:
<When the AC power is on (The power cords are plugged to the wall outlet)>
(1) Confirm the POWER LED of the system.
z If the POWER LED is lit, shut down the OS and unplug the AC power cord
after the POWER LED turns off.
z If the POWER LED is turned off, unplug the AC power cord.
Power supply unit LED
Rear
Vie
w
A
C inlet
(PSU 0)
A
C inlet
(PSU 1)
Cooling fan LED
Cooling fan LED
Power supply
unit LED
CPU/IO
module #0
FT Status LED
UID LED
POWER LED
Module
POWER
switch
Front
Vie
w
CPU/IO
module #1
Status LED
POWER
switch
DISK
A
CCESS
LED
NMI
switch
Module
POWER
LED
FAULT
LED