Filter
Top Products
4-6 Windows Setup
Step 2: Prepare for Express Setup
Before starting Express Setup, be sure to do the following. If these preparations are not done, setup
cannot be performed properly.
2-1: Prepare NEC Express5800/ft series
With the power of NEC Express5800/ft series off, follow the steps below:
1. Prepare NEC Express5800/ft series.
x Mount the modules for both systems.
x Insert only one hard disk to the slot0.
x Remove all LAN cables.
x Remove optional SCSI devices such as a tape device from the SCSI connector.
IMPORTANT:
Do not mount any hard disk into any slots of any modules unless specified. If multiple
hard disks are inserted, the hard disk to install OS cannot be determined.