Filter
Top Products
GB
9
TROUBLESHOOTING
NO SOUND • Power AC Mains cable unplugged or
power not switched on
• TAPE MONITOR is selected
• Mute on
• Internal fuse blown
• Check if AC Mains cable is plugged in and
power switched on
• De-select TAPE MONITOR mode
• Switch off Mute
• Consult dealer
Problem Cause Solution
NO SOUND IN ONE CHANNEL • Speaker not properly connected or
damaged
• Input lead disconnected or damaged
• Check connections and speakers
• Check leads and connections
WEAK BASS / POOR STEREO IMAGE • Speakers wired out of phase • Check connections to all speakers
in the system
REMOTE CONTROL HANDSET NOT
WORKING
• Batteries flat, or incorrectly inserted.
• IR transmitter or receiver windows
obstructed
• Check or replace batteries
• Remove obstruction