Filter
Top Products
7.4 How to Change the Backlight for Liquid Crystal
7 - 4
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
PERFORMANCE
4
NAMES OF
THE PARTS AND
THEIR SETTINGS
5
ROUGH
PRE-OPERATION
PROCEDURE
6
HANDLING
7
MAINTENANCE AND
INSPECTION
8
EMC DIRECTIVE
* When changing the backlight, use care not to touch the circuit board in the GOT.
[Disposal Instructions]
5) Unplug the cable connector of the backlight from the
connector of the display device.
6) Remove the backlight from the display device.
Using a flat-blade screwdriver makes removal easy.
7) Fit a new backlight in the reverse procedure of
removal.
To install the display unit, please follow the procedure
reverse to that for removing. Please make sure to
install the display unit securely and apply a torque
within the torque range as specified to the fixing
screws for the GOT.
CAUTION
To dispose of, please treat the back light as an industrial waste.
a)
b)
a)
b)
Remove the backlight.
When you push the screwdriver into the hole
in the unit side, the backlight comes off.